XGIMI X-Desktop Stand Pro Desktop bracket For XGIMI Projector H2 / H3 / Halo

Description

X-Desktop Stand Pro
Model: D183S
Product color: black
Size: Chassis diameter 200X gimbal to bottom silicone pad height 95mm
Product weight: 585g
Loading capacity: ≤ 4kg
Product material: Aluminum alloy, zinc alloy, environmentally friendly silicone, PC+ABS plastic
Packing: Desktop stand*1, instructions*1
Effecient using of room
The large-diameter round thickened aluminum alloy base has a flat area of only 0.1 square meter, improving vertical space utilization. While ensuring
the stability of the fuselage, it can also increase the level of spatial decoration.
Tidy desk
Contrast color highlight champagne gold die-casting support, unique S-shaped interpenetrating structural form, effective management of power supply and other connecting lines, practical
and beautiful, no longer worry about line loss caused by cable ties
Contains the ingenuity of the designer
XGIMI uses a fine process to improve the user's overall experience. The edge of the aluminum plate is diagonally supported. After dozens of high-frequency grinding, the C-shaped arc angle is achieved, which can ensure that the user can achieve a better grip when lifting the stand.
Using it whenever and wherever
Multi-scenes and practical, versatile style, can be perfectly integrated into various environmental styles
Setting up whichever way you want
Note: 360 degrees can be rotated in a panoramic manner, and 12 degrees in pitch can be adjusted
Match with many projectors
The gimbal screws use 1/4 international standard screws, which can be adapted to most projectors on the market
Suitable for XGIMI models:
H series, Z series, Play series, Cc series models
If there is no screw hole on the bottom of the machine, you need to match the adapter plate
(When adapting to non-XGIMI models, please pay attention to the standard of the screw port on the bottom of the model)
About alloy materials
Aluminum alloy sun-drawing process, bright and dazzling
Combining materials with high pressure such as heating, high temperature and so on
Zinc alloy die-casting gold plating process, showing the luxury
Zinc alloy die-casting gold plating process, showing the luxury
About details
1. Non-slip silicone pad
Increase stability, can effectively prevent slipping and protect your desktop
2. Thickened diagonal brace The maximum thickness of the inclined support is 8mm, which can withstand more pressure
3. Silicone anti-scratch layer
It can effectively transition the machine shock and prevent the bottom of the machine from being scratched and leaving traces
4. Full drawing process The bottom surface + sides are brushed, and XGIMI has the same intentions in the invisible places.
Important
1. The safety load-bearing range of the product is within 4KG, do not exceed this weight when installing the projection device
2. Non-professionals are not allowed to disassemble this product by themselves
3. Do not press the product too hard, otherwise it may cause deformation or even break
4. Make sure that the chassis is level when using it. If it is in an uneven position such as potholes or inclines, it may lead to the risk of the machine tipping over, please operate with caution